Hyundai Wia KF5600M

X / Y / Z axis travel: 43.3″ / 22.0″ / 20.5″
Table top to spindle nose: 5.9″ ~ 26.4″ [30.9″]
Column to spindle center: 27.2″
Table size: 49.2″ x 22.0″
Allowable load: 2,204.6 lbs
Table T slot spacing x width: (5) x 3.94″ x 0.71”
Spindle Speed:20,000 rpm
Spindle Taper: BCV # 40
Pull Stud (Retention Knob): 45°
Spindle motor: (S2 15min) 29.5 HP
Spindle torque: (S2 15min) 72.3 lbf.ft
Automatic Tool Changer
Number of Tools: 30
Tool Shank: BBT40
Max.Tool Dia.: Ø3.1″
with empty adjacent pockets: Ø4.9″ (Ø125mm)
Max. Tool Length: 11.8″
Max. Tool Weight: 17.6 lbs
Tool change time (tool to tool): 1.3 sec
Tool change time (chip to chip): 3.2 sec [3.5 sec]
MOTION: X / Y / Z axis rapid traverse rate: 1,417 / 1,417 / 1,181 IPM (36 / 36 / 30m/min)
Max. Cutting Feed: 787 IPM (20,000 mm/min)
Least command increment: .0001″ (.001mm)
Coolant tank capacity: 96.4 gal (365 liter)
Hydraulic tank capacity and required oil – (Booster Cylinder)
Lubrication tank capacity and required oil 1.1 gal (4 liter) / G68
Machine Height: 119.2″
Floor Space (L) with side chip conveyor & tank: 153.7″
Floor Space (W) with control panel: 92.2″
Machine weight: 14,330 lbs
Power required: 32 kVA / ??? amp @ 220V
Voltage required: 205 – 235 Volts / 3 Phase
Fanuc 31i-B Control
Powerful 29.5 HP (22 kW) spindle motor (S2 15min)
Spindle Oil chiller system
BCV # 40 taper [HSK tool holder_Opt.]
Large Linear Roller guide with roller bearings
ATC 30 Tools [40T_Opt.]
“Y” shape ribbed column structure • Metal plate coupling on all axes
Embed operating panel
290 PSI through the spindle coolant
Remote Manual Pulse Generator
Spindle override 0% to 200% (10% Unit)
Massive Meehanite cast iron bed
Double Pre-Tensioned Ball screws
Rigid tapping
Program and data protection key switch
Slanted telescopic way covers
Chip Conveyor (38” discharge height)
Flood coolant with large separate coolant tank
3 color tower signal light
Full enclosure splash guard